Joe:

I was taught, and have always used, a trick for face gluing large pieces.
Drive 3-4, small finishing nails, depending on the size of the boards, on
one face of a piece and cut them to leave about 1/16" protruding above the
glue surface. It keeps the board from moving while clamping.

At 12:03 2/28/97 EST, Joseph Dolinar Wrote
[Snip]
ce glued stock.  This appears to be a
>pretty tricky task, considering that the boards are probably very slippery
>with glue on them.  For those who have tried this (or even if you didn't)
>are there any "tricks" for making this process easier (Mike W?)?
[Snip]

Dan Hogan 
    West Covina, CA
    dhhogan@l...